4
2. System Mode
The current method of temperature control: heat, cool, or auto. See
System Mode on Pg. 13.
3. Current Set Point
The temperature at which the system is programmed to maintain at a
particular point in time.
Press Y(up) or (down) to adjust it manually by increments of 1° F(0.5°
C). If the system is set to Auto, press A(left) or "(right) to switch
between heat and cool set points.
When you manually adjust the set temperature, you put the system into a
Hold mode. See Hold Action on Pg. 20. To return back to the
pre--programmed temperature, press OK.
For maximum savings you should program your Legacy Line Wi--Fi
Thermostat to control the temperature automatically. See Creating Your
Weekly Schedule on Pg. 27.
4. Current Time/Date
Displays the current date and time for your time zone.
5. Internet Access
Indicates the Legacy Line Wi--Fi Thermostat is connected to the Internet.
The more bars, the stronger the signal. A chain link indicates
communication with the Bryant web servers.
Using the Navigation Buttons
The navigation buttons located on the right of the Legacy Line Wi--Fi
Thermostat let you select options and control the thermostat.
OK
A13356
To Next Page
Loading...
Need help?
General
