Bryant T2--WHS01 User Manual

17
Rebooting the Legacy Line Wi--Fi Thermostat
You can reboot the thermostat by removing the thermostat carefully from
the wall, wait three seconds and reattach to the thermostat wall plate. The
thermostat will reboot but will not alter programming or configuration
options.
Cleaning the Legacy Line Wi--Fi Thermostat
You can clean the Legacy Line Wi--Fi Thermostat’s screen by spraying
water or any mild, non--abrasive household cleaner on to a clean cloth.
Wipe the surface of the screen with the dampened cloth.
NOTE: Do not spray any liquids directly onto your Legacy Line Wi--Fi
Thermostat.
What To Do If You Move
If you move there a few things to consider about your Bryant system:
If you did not activate your personalized Web Portal, you can simply take
the Legacy Line Wi--Fi Thermostat with you or leave it in the house.
If you already have registered your Legacy Line Wi--Fi Thermostat, you
need to update your Web Portal to reflect your new address.

Bryant T2--WHS01 Specifications

General

Brand	Bryant
Model	T2--WHS01
Category	Thermostat
Language	English