TO TURN ON: Press the power key for one second until the LED flashes green.
TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red.
NOTE: The Brydge 12.9 MAX+ includes Instant-On™, which means that reconnecting no longer takes seconds.
Once paired, your keyboard will instantly connect to your iPad for up to 4 hours before entering sleep mode
without impacting power consumption.
TO PAIR: Press and hold the Bluetooth
TM
key for three seconds until the LED flashes blue.
On your iPad, under Settings > Bluetooth
TM
select Brydge 12.9 MAX+.
When successfully paired, the blue LED will turn off and your keyboard and trackpad will be active.
POWER
PAIR
SETTINGS
AssistiveTouch settings must be off for gestures to work properly.
To do this, go to iPad Settings > Accessibility > Touch > AssistiveTouch > OFF
TRACKPAD GESTURES
Open Today View
Use two fingers to swipe right.
Switch between open apps
Swipe left or right with three
fingers.
Zoom in and out
Pinch open to zoom in, or pinch
closed to zoom out
Open the App Switcher
Swipe up with three fingers,
pausing before you lift your
fingers.
Scroll Up or Down
Swipe two fingers up or down.
Scroll Left or Right
Swipe two fingers left or right.
Go Home
Use one finger to swipe the
pointer past the bottom of the
screen.
Open Control Center
Use one finger to swipe to the top
right corner.
Open Search
Swipe down with two fingers.
UPDATE FIRMWARE
Download Brydge Connect from the App Store for the latest firmware updates.
To Next Page
Loading...
