BT Big Button 100 User Manual

Using the phone
Ringer tone
There are three settings, R1, R2 or R3.
1. On the underside of your BT Big Button 100, set the
Ringer tone switch to the setting you want.
Recall
The button is used to access a range of switchboard
services, for example, to transfer calls and with some
BT Calling Features or services available via your network
provider.
Enter a pause
If your BT Big Button 100 phone is connected to a
switchboard, you may need to enter a Pause in a stored
number after the switchboard access code in order to
give your phone time to get an outside line.
1. When storing a number press where you want to
enter a pause. This will put a delay of 2.5 seconds in the
number to be dialled.
Redial
R
A pause can be stored in the
3 one-touch and 10 memory
phone numbers.
Ringer
Tone
Ringer
Volume
Amplify
R1
R2
R3
Hi
Lo
Off
In
Out
Mode
TE
TB
13
BT Big Button 100 – Issue 2 – Edition 1 – 10.02.06 – 6361

BT Big Button 100 Specifications

General

Brand	BT
Model	Big Button 100
Category	Telephone
Language	English