BT Big Button 100 User Manual

You can use the - buttons on the keypad to store
and dial a total of 10 phone numbers. Each stored phone
number can be up to 32 digits long.
Store a number in the 10 number memory
Remove the one-touch number memory label to reveal
the button.
1. Lift the handset or press .
2. Press .
3. Press the
- button you want to use as the memory
location.
4. Enter the phone number you want (up to 32 digits).
5. Press to confirm. You hear a confirmation beep.
The number is stored.
Dial a number in the 10 number memory
1. Lift the handset or press .
2. Press then press the
- button you want.
The stored phone number is dialled.
Memory
Handsfree
Store
Store
Handsfree
Store
To cancel storing a number,
replace the handset.
You can make a note of your
memory numbers on the
label underneath the
handset. There is also an
enlarged label at the back
of this guide if you prefer.
10 Number memory 17
BT Big Button 100 – Issue 2 – Edition 1 – 10.02.06 – 6361
You may hear an exchange
announcement, during or
after the storing sequence,
suggesting that there has
been an error, or that you
should redial the number.
This is normal and does not
mean that the storing
sequence is in error.

BT Big Button 100 Specifications

General

Brand	BT
Model	Big Button 100
Category	Telephone
Language	English