14
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Default
You can reset your BT3530 back to the default settings.
This will not delete your phonebook entries. To delete your phonebook, see page 22 “Delete all
phonebook entries”.
1. Press the Left soft key Menu to open the main menu.
2. Press
or
until the display shows RESET and press .
3.
PIN? is displayed, enter the PIN (default 0000) and press .
4.
CONFIRM? is displayed, press .
Default settings table
Handset Default Value Base Default Value
Redial List EMPTY System PIN (4-digit) 0000
Call List EMPTY Base Ringer Melody MELODY 1
External Ringer Melody MELODY 1 Ringer Volume VOLUME 5
Internal Ringer Melody MELODY 2
Ringer Volume VOLUME 5 Answer Machine Default Value
Earpiece Volume VOLUME 3 Answer Machine ON/OFF ON
Handset Name HANDSET Answer Mode ANS & REC
Key Beeps OFF OGM PRE-RECORDED OGM
Low Battery Tone ON Answer Delay 5 RINGS
Out of Range Tone ON Message Record Time 3 MINUTES
Ringer On/Off ON Remote Access OFF
Auto Answer On/Off ON Remote Access PIN 0000
Date 01/01/14
(4-digit)
Time Format 24 HR
Time 00:00
Alarm OFF
Key Lock OFF
To Next Page
Loading...
Need help?
General
