37
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Answer delay
Answer delay sets the number of times your BT3530 will ring
before the answering machine picks up your call. The default
setting is 5 rings. You can change this setting from between 2-9
rings or to time saver mode.
1. Press the Left soft key Menu, the display shows
ANS MACHINE,
press
.
2. Press
or
until ANS SETTINGS is displayed and press
to select.
3. Press
or
to display ANSWER DELAY and press .
4. Press
or
to select the number of rings you want
(2-9)or
TIME SAVER and press .
5. Press and hold
to return to standby.
Remote access
Ensure that you have Remote Access turned on and that you
have set a Remote Access PIN first if you want to use this feature.
When switched on, you can call in from another phone to listen
to your messages and operate your answering machine. You are
asked to enter your system PIN so that other people cannot ring
up and listen to your messages. To change your System PIN, see
page 38.
Switch remote access on/off
1. Press the Left soft key Menu, the display shows ANS MACHINE,
press
.
2. Press
or
until ANS SETTINGS is displayed and press
to select.
3. Press
or
to display REMOTE ACC and press .
4. Press
or
to choose either ON or OFF and press .
5. Press and hold
to return to standby.
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
BT3530 answer machine to
answer calls.
To Next Page
Loading...
Need help?
General
