EasyManuals Logo

BT BT3530 User Manual

BT BT3530
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Warning
Do not place your BT3530 in the
bathroom or other humid areas.
Handset range
The BT3530 has a range of 300
metres outdoors when there is a
clear line of sight between the base
and the handset. Any obstruction
between the base and handset will
reduce the range significantly.
With the base indoors and handset
either indoors or outdoors, the range
will normally be up to 50 metres.
Thick stone walls can severely affect
the range.
Signal strength
The
symbol on your handset
screen indicates when you are in
range. When you are out of range,
the
symbol flashes, and the
screen displays
SEARCHING.
You should move closer to the base
if this happens to ensure the full
functionality of your phone.
Important
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base station must be plugged
into the mains power at all times.
Which socket?
:
Power socket
: Telephone line socket
Talk/Standby time
Under ideal conditions, fully charged
handset batteries should give about
10 hours talk time or 100 hours
standby time on a single charge.
Getting started
Location
You need to place your BT3530 base within 2 metres of a mains
power and telephone socket so that the cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT3530 works by sending radio signals between the handset
and base. The strength of the signal depends on where you site
the base. Putting it as high as possible ensures the best signal.
Setting up
1. Plug the mains power cable with the black ring on the adaptor
(item code 066773) into the power socket marked
on the
back of the base and secure the cable behind the retaining clip.
Plug the other end into the mains socket and switch on.
2. Remove the protective film from the
handset screen and activate the
batteries by pulling the plastic tab
away from the back of the handset.
Mains power cable
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
Telephone line cord
(pre-installed)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BT BT3530 and is the answer not in the manual?

BT BT3530 Specifications

General IconGeneral
BrandBT
ModelBT3530
CategoryTelephone
LanguageEnglish

Related product manuals