42
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Registering another make of handset
to your BT3530 base
If you want to register another
make of handset (i.e. not a BT3530
handset) to your BT3530 base
then you will need to follow the
Registration instructions that came
with the handset first and then
continue with the base part
of the registration procedure
(as shown opposite from point 3).
Please note that registering other
types of handset will only provide
limited compatibility i.e. you may
only be able to make and receive calls
on the additional handset.
You have 60 seconds to complete the
registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.
Registering additional
handsets
You can use up to five BT3530 handsets with your
BT3530 base to extend your phone system without needing to
install telephone extension sockets for each new phone.
If you have purchased a BT3530 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT3530 base before it can be used.
Registering a handset
1. Press the Left soft key Menu then
or
until
REGISTRATION is displayed, then press .
2.
PIN? is displayed. Enter the base PIN (original setting=0000)
and press
.
3. The handset will display
SEARCHING, press and hold the
button on the base until you hear a long beep and the green
In use light begins to flash.
4. The handset will temporarily display
REGISTERED then will
display
HANDSET.
When the registration has succeeded, the handset is
automatically assigned the next available handset number.
To Next Page
Loading...
