32
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Call screening
Via the base:
You can listen to a caller leaving a message via the base speaker.
Once they start leaving a message if you decide you want to speak
to the caller simply pick up the handset and answer the call.
Via the handset:
When a caller is leaving a message
SCREENING? appears on
the display.
Pressing
allows you to monitor the message being left through
the handset earpiece without the caller hearing you.
You can then press
to accept the call or
to stop monitoring.
Operating the answer machine via
the handset
Switch answer machine on/off
When first connected to the mains power, your BT3530 is set to
ON and Answer and Record.
When set to on, the
icon is displayed on the handset screen.
1. Press the Left soft key Menu, the display shows
ANS MACHINE,
press
.
2. Press
or
until ANS ON/OFF is displayed and press
to select.
3. Press
or
to select ON or OFF, then press
to confirm.
4. Press and hold
to return to standby mode.
Outgoing messages
This is the message your caller hears when the answering
machine picks up their call. Your BT3530 comes with
two pre-recorded male and female outgoing messages to choose
from. You can also record your own outgoing messages.
To Next Page
Loading...
Need help?
General
