If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
18
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The call timer
seconds of the call. Once the call
has ended, the total call time
will show on the display
for 3 seconds.
Auto answer
If auto answer is set to On you
can end a call by placing the
handset back in the base. If auto
to press
to end the call. Auto
answer On is the default setting,
see page 47.
Using the phone
Switching the handset on and o
1. Press and hold
until the handset turns on
Making an external call
1. Press
.
2. When you hear the dial tone, type the number.
When the call begins, the light on the phone’s base
Preparatory dialling
mistakes before the call is connected. If you do make
a mistake, select
to delete the last digit.
Ending a call
Press
.
Receiving a call
When you get a call, your phone will ring and the
display service, the caller’s number will show on the
display. Press
to answer the call. When you’ve
to hang up.
To Next Page
Loading...
Need help?
General
