If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 47
Memory full
The memory is full if there is less
than 15 seconds of recording
time left. When full, the
display and the machine will
switch to Answer Only mode. If
the memory becomes full when
a caller is leaving a message,
they will hear a beep and the
call will end.
You will need to delete
messages before your answer
machine will be able to record
new ones. To delete all old
(played) messages, see page
45 and opposite.
Deleting all played messages
1. When the base isn’t in use, press and hold
to delete all your old messages. You will hear a
Remote access
With Remote access, you can listen to your answer
machine messages from another phone. You’ll need
to set a PIN. The feature will need to be switched On
for it to work.
Setting or changing the remote access PIN
1. Press
to open the menu. Press until you get
to Answ Machine. Press
.
2. Press
until you see Answ Setting, then press
again.
3. Use the arrow buttons again until you see Remote
Acc. and press
.
4. Press
until you get to Change PIN. Press .
5. Type your current PIN, press
.
6. Type in your new PIN and press
and then repeat
this step. Your new PIN will be saved.
To Next Page
Loading...
Need help?
General
