BT BT6610 - Clock;Alarm; Set the Time and Date; Set the Time Format (12 or 24 Hour)

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
65 Clock/Alarm
You must enter the full date:
day, month and year.
You must enter both time and
date otherwise nothing will be
saved.
If you didn’t set the time and date when you first
set-up your phone then you will need to do so
before you can set an alarm. The clock will also be
displayed on the handset screen in idle mode.
If you have subscribed to a Caller Display service the
time and month will be set when you receive your
first call but you will still need to set the year.
Set the time and date
1. Select Menu, scroll
to display Clock/Alarm
and press Select.
2. Press
to highlight Time and date and
press Select.
3. Use the keypad to enter the digits for the time.
4. Press
then or to select AM or PM, then
press
again and enter the date. Select Save.
Set the time format (12 or 24 hour)
1. Select Menu, scroll
to display Clock/Alarm
and press Select.
2. Press
to highlight Time format and
press Select.
3. Press
or to display 12 hours or 24 hours and
press Save.
The default time format is
12 hour.