BT BT8600 - Switching BT Call Guardian On;Off; Personalize Announce Message

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
22
BT Call Guardian
Switch BT Call Guardian on/o
When Call Guardian is set to On, it is On for whichever mode you’re using
(e.gAnnouncemode).IfyouturnCallGuardianO,allcallswillbeallowed
through, even if they are already on your blocked list.
1. In idle mode, press
.
2. Call Guardian settings are PIN protected, so follow the instructions to set
your PIN or enter your PIN and select
OK.
3.
BT Call Guardian is highlighted, press Select or .
4.
Guardian settings is highlighted, press Select or .
5. Press
or toswitchBTCallGuardianon/o,thenpressSave.
Personalise your announce message
You can personalise the BT Call Guardian greeting, by adding your name to
the Announce message.
1. Select
Menu, scroll to Call Control and press Select or .
2. Follow the instructions to set your PIN or enter your PIN and select
OK.
3.
BT Call Guardian is highlighted, press Select or .
4. Scroll to
Announce msg, press Select or .
5. Press
Select, or , on Record name and follow the voice prompt and press Save.
6. If you are happy with your recording, press
.