BT BT8600 - Turning Remote Access On;Off; Remote Answer Machine Control

51
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Using the phone
6. Enter the new 4 digit PIN, select OK, then enter the new PIN again and
select OK. The display will show New Access PIN saved.
Turn remote access on or o
You cannot turn Remote access On until you have set a remote access PIN.
ThedefaultsettingisO.
1. Select Menu, Answer Phone is displayed, press Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and press Select.
4. On/Off is displayed, press Select.
5. Press
or to display On or Off and select Save. Saved will be displayed.
If you forget to switch on your answer machine
RemoteAccessmustrstbeenabledtoallowyoutoswitchontheanswer
machine remotely.
1. Call your number from another phone and let it ring. After 20 rings the
machine will switch on and answer your call.
2. Press
*
and enter your 4 digit remote access PIN when prompted. You
can play back your messages. If you do not choose to switch your answer
machineOn,itwillswitchowhenthecallisended.