BT BT8600 - Call Control Settings; Setting Up Do Not Disturb

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
30 Call control settings
To enter the Call control menu you need to enter your remote access PIN.
Thiswillneedtobesetthersttimeyoutryandenterthemenu,simply
follow the on screen instructions. If you have already changed the remote
access PIN when setting your remote access then you will not need to set it
again as this PIN is used for both Call control and Remote access.
Set-up Do not disturb
Donotdisturballowscallstobereceivedsilentlywithminimalnotication.
Thedefaultiso.
1. In idle mode, press
.
2. Enter the access PIN and select
. Scroll to Do Not Disturb and
press Select.
3. Press
or to select On, Off or Timed. If you select Timed you need to
selecttheonandotimesyouwant,press
and enter the on time,
then
againandentertheotime.Press to highlight whether
you want VIP calls to be Allowed or Barred using
or , then press Save.
Thechosensettingwillbedisplayedandyouwillhearaconrmationtone.
When set to On, the idle screen will display
DO NOT DISTURB instead of the
handset name. For more information and general advice on handling
unwanted calls please go to bt.com/unwantedcalls