BT BT8600 - System PIN and Settings Reset; Clearing User Data

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
57
Using the phone
Change the system PIN (dierent to the Call control & Remote access PIN)
2. Press
to highlight Change Sys. PIN, press Select. If the current PIN is
0000, you’ll be prompted to enter the new four digit PIN, then press
OK.
If the current PIN is not 0000, you’ll be prompted to enter the old
(current)fourdigitPINrstandthenselect
OK. Then follow the prompts
and enter the new four digit PIN.
3. Enter the new four digit PIN again and select
OK. The display will show
New system PIN saved.
Reset the handset or base settings
2. Press
to highlight Reset, press Select.
3.
H/set settings is highlighted. Press Select or press to highlight Base
settings
and then press Select.
4.
Reset <handset or base> settings back to default? is displayed, select Yes.
5.
Resetting <handset or base> settings... is displayed while the reset takes place.
Oncenished,
<handset or base> settings reset back to default is displayed.
Clear the handset and base user data
2. Press
to highlight Reset, press Select.
3. Press
to highlight Clear user data, press Select.
4. If the current system PIN is not 0000 you’ll be prompted to enter the PIN
then press
OK. If it’s 0000, you’ll be taken straight to step 5.
5.
Delete data on all handsets and base? is displayed. Select Yes.
6.
Deleting all user data...isdisplayed.Oncenished,All user data deleted
is displayed.