10- 12 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical systems – 5000 LPE 240
Functional description
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
10.3.6 Neutral speed reduction on slopes
If the driver release the speed leaver (L1) on a slope and the truck
doesn’t come to a stop within a certain time the electrical brake will be
applied.
10.3.7 Braking
The brake is always applied when the truck is started with the tiller arm
in it’s upper or lower position (S10 open). The brake is released in the
same moment as the conditions for driving are fulfilled and the truck
starts to move.
Conditions to brake the truck:
• S10 open or S19 open.
10.3.8 Lifting the forks
• S34 activated.
• S31 closed.
• Battery status ok (if battery capacity >20% left).
10.3.9 Lowering the forks
• S41activated.
10.3.10 Horn
• S18 activated.
To Next Page
Loading...
