Need help?Do you have a question about the BT SWE120 and is the answer not in the manual?
Explanation of various warning symbols used throughout the manual.
Essential safety precautions and practices for performing service work on the truck.
Safety guidelines for working on the truck's electrical system.
Instructions and precautions for safely lifting the truck.
Procedures and safety regulations for installing the truck's battery.
Adjusting essential truck parameters for initial operation.
Pre-operation checks to ensure truck functionality and safety.
Detailed schedule for performing service maintenance tasks.
Explanation of how the truck's various functions operate.
Overview and categories of truck parameters.
Introduction to error codes and troubleshooting procedures.
Guides for diagnosing and resolving truck issues.
How to display and interpret stored error code events.
Explanation of the structure and meaning of error codes.
List of specific error codes, their events, and possible causes/actions.
Diagnostic chart grouping issues by common symptoms.
Step-by-step guide to removing the drive motor from the truck.
Procedure for removing the drive gear from the truck.
Procedure for removing and installing the truck's drive wheel.
Procedure for replacing the truck's wiring harness.
Steps for replacing the transistor regulator module.
Steps for adjusting the hydraulic system's pressure limit valve.
Procedure for removing and installing the fork carriage.
Steps for replacing the mast assembly on the truck.
Specifications for SWE100, SWE120, and SWE140 models.
Specifications for SWE120L, SWE140L, and SWE200D models.
Diagrams illustrating electrical connections and component layouts.
To Next Page
General
