27 – 2 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Instructions for disposal
Marking of plastics
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
27.2.2 Markings according to Standard
Standards: 58-02-001, 58-02-003 and 58-02-004.
A few examples of markings are presented below. For more
information, please refer to the standards above.
The product material and trade name of each item are indicated
between arrows, e.g. >PP<.
Abbreviations
- ABS: acrylonitrile/butadiene/styrene
- HDPE: High Density Polyethylene
- LDPE: Low Density Polyethylene
- PA: Polyamide
- PA6: Amide resin 6
- PA66: Amide resin 66
- PBT: Polybutylene terephtalate
- PC: Polycarbonate
- PET: Polyethylene terephtalate
-PMMA: Plexiglas
- POM: Polyoxymethylene, Polyformaldehyde
- PP: Polypropylene
- PUR: Polyurethane
Marking examples
Products made from a single substance
ABS (acrylonitrile/butadiene/polystyrene):
>ABS<
Polyurethane:
>PUR<
Plastic compounds
A compound based on acrylonitrile/butadiene/polystyrene and
carbonate plastic:
>ABS+PC<
Filled or reinforced materials
Polypropylene with 30% mineral powder:
>PP-MD30<
https://www.besttruckmanuals.com/
To Next Page
Loading...
