Need help?Do you have a question about the BT SWE140 and is the answer not in the manual?
General| Rated capacity | 1400 kg |
|---|---|
| Load Capacity | 1400 kg |
| Weight | 1780 kg |
| Lifting height | 3000 mm |
| Lift Height | 3000 mm |
| Power Source | Electric |
Provides essential safety guidelines for performing service activities on the truck.
Outlines critical safety precautions when working on the truck's electrical system.
Details the correct and safe methods for lifting the truck and its components.
Covers safety regulations and procedures for installing the truck's battery.
Explains how to set and manage PIN codes for driver profiles and truck access.
Details the adjustment of parameters required for truck operation and specific applications.
Lists essential checks to be performed before the truck is put into operation.
Describes the step-by-step operation of key truck functions like starting and driving.
Provides a systematic approach to diagnosing and resolving truck issues.
Lists common error codes, their events, possible causes, and recommended actions.
Organizes troubleshooting guidance by common truck symptoms like "cannot be driven".
Describes how to activate and use the truck's built-in test functions for troubleshooting.
Provides a step-by-step guide on how to remove the drive motor from the truck.
Details the procedure for removing the drive gear, noting exceptions.
Guides through the process of removing and installing a drive wheel.
Provides the method for replacing a castor wheel on the truck.
Details the steps required to disassemble the tiller arm.
Covers the process for dismantling and installing the tiller arm's safety sensor.
Details the steps for replacing the truck's wiring harness, including connector handling.
Explains the procedure for replacing the transistor regulator, requiring TruckCom access.
Describes the calibration function for proportional valves and its effect on parameters.
Explains how to adjust the pressure limit valve to ensure proper load handling.
Details the steps for safely disassembling the hydraulic unit.
Details chain setting checks and inspection for wear, rust, and stiffness.
Guides through the process of replacing the mast, including disconnection steps.
To Next Page
