Hydraulic system 6000
Disassembling the hydraulic unit
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 17 – 11
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
17.7 Disassembling the hydraulic unit
Before commencing any work on the hydraulic unit, make sure the
forks have been fully lowered.
1. Disconnect the hydraulic hose. See section “17.4.1 Quick change
connector”.
2. Undo the motor cables using a spanner.
3. Disconnect electrical connection to the lowering valve.
× n
s mm
Step 1.
Step 2.
Step 3.
s: 13 mm, n: 2off
https://www.besttruckmanuals.com/
To Next Page
Loading...
