9 – 6 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Electric drive motor 1700
Cleaning
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
9.5 Cleaning
Keep the motor as clean as possible since this is a decisive factor for
correct operation. Regularly inspect the motor and motor compartment
for build-up of dust, oil and other contaminants.
Dirty and/or greasy components should be cleaned with a rag
moistened with solvent. Use a rag of lint-free cloth material. Do not use
too much solvent as it could penetrate into the motor parts.
After cleaning, dry the components thoroughly. The easiest way is by
heating.
Note:
Windings and insulation must not be heated over 125°C and not for
longer than 6 hours.
https://www.besttruckmanuals.com/
To Next Page
Loading...
