Functions and parameters
Parameters
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 6 – 11
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
6.5.4 Operator parameters
Note:
Changing specific truck parameters changes the truck's driving
properties. Do not change any parameter values without the
necessary know-how.
Parameter Designation/
unit
Min./
Max.
Incr
eme
nt
Def
ault
Description
4 Acceleration, % 10/100 5 70 Determines the truck's
acceleration capacity. The
lower the value of this
parameter, the longer time
it takes for the truck to
accelerate to top speed.
5 Deceleration, % 10/100 5 90 Determines the braking
force when the speed
control is returned to
neutral position. The lower
the value of this
parameter, the longer the
time to reduce speed.
6 Maximum
speed, %
30/100 5 90 Determines the maximum
travel speed.
7 Maximum
speed in turtle
mode, %
30/100 5 50 Determines the truck's
maximum travel speed
when the turtle mode has
been activated.
https://www.besttruckmanuals.com/
To Next Page
Loading...
