9 – 2 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Electric drive motor 1700
Disassemble the motor from the truck
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
9.2 Disassemble the motor from the
truck
1. Remove the covers.
The top cover is secured with Velcro tape. Be careful when
detaching the cover. Use of a suitable tool is recommended.
2. Cut off the cable ties of the cable duct on the transistor regulator
side and disconnect cable connectors X5 and X60.
3. Loosen the operating console's mounting screws (a) and remove
the operating console and tiller arm.
4. Remove the brake's cable connection Q1.
https://www.besttruckmanuals.com/
To Next Page
Loading...
