BT SWE120 - Changing the Position of the Controls - Support Arm Lift; Fork Lift

Tiller arm 4000
Electrical steering system – 4000
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 15 – 13
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
15.5.8 Changing the position of the controls -
support arm lift / fork lift
1. Pry off the lift control buttons using a thin screwdriver and switch
the positions with the rear buttons.
2. Make sure the lips catch when the new buttons are inserted.
3. Connect a PDA or PC and use TruckCom to change parameter
1023 to 2.
4. Start the truck and make sure the change is correct.
https://www.besttruckmanuals.com/