BT SWE120 - Oil and Grease Specification

Oil and grease specification
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 24 – 1
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
24 – Oil and grease specification
* Similar products from another manufacturer may be used.
Tabell 1: Oil and grease specification
Lubricant type Specification Use
Grease S213366
Q8 Rubens WB
Storage and bushings
Hydraulic oil See table below Hydraulic system
Transmission oil Synthetic
API GL-5
SAE 75W-90
Gear
Grease See table below Chains
Grease Grafloscon
A-G1 (Klüber)
Gear rim
Grease 755701-040 Castor wheel
Grease S213366
Q8 Rubens WB
Mast
Hydraulic oil
Ambient
temperature
Viscosity class Specification
< 0
°
C
VG 27.5 ISO 6743-4 category HV
DIN 51524 part 3= HVLP
> 0
°
C
VG 32 ISO 6743-4 category HM
DIN 51524 part 2 = HLP
Chain grease
Ambient
temperature
Viscosity class Recommended products*
> - 40
°
C
< - 30
°
C
VG 15 Klüberoil 4UH 1-15, Klüber Lubrication
> - 30
°
C
<+ 5
°
C
VG 68 Klüberoil 4UH 1-68N, Klüber Lubrication
Anticorit LBO 160 TT, Fuchs DEA
>+ 5
°
C
< +45
°
C
VG 150 Klüberoil 4UH 1-150N, Klüber Lubrication
Anticorit LBO 160, Fuchs DEA
Rexoil, Rexnord Kette
>+ 45
°
C
<+ 80
°
C
VG 220 Klüberoil 4UH 1-220N, Klüber Lubrication
https://www.besttruckmanuals.com/