BT SYNERGY - To store a quickdial number

To store a quickdial number
Once you have selected either your ‘Personal’ or ‘Shared’
QUICKDIAL store:
• Press and release the
QUICKDIAL button
• LCD shows 1 if no number stored or 1 followed by the
number stored in the memory.
• Press the ➔ button to scroll through the memory
locations
• When the required memory location is displayed press
and hold the
QUICKDIAL button for at least 2 seconds
or until a beep is heard.
• Enter the phone number you want.
• The display shows the location and the phone number.
• Press the ✔ button to store the number. You hear a
confirmation beep and the display shows STORED
.
You can scroll through the quickdial numbers and see
any available locations. You can then change or add a
number.
You may find it useful to keep a note of the location number
(0-9) you set for quickdials numbers. Use the directory
label on the back of the handset.
Quickdial
0-9
16