BT SYNERGY User Manual

27
To reset your Synergy Handset to its original
settings
• Press the ➔ button. Display shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows KEYTONES.
• Press the ➔ button until the display shows RESET.
• Press the ✔ button. Display shows CONFIRM.
• Press the ✔ button again. Display shows CONFIRM
again.
• Press the ✔ button. Display shows REG. The handset
will be de-registered from the base station(s).
This will reset:
RINGER VOLUME is set to high
RINGER MELODY is set to A
EARPIECE VOLUME set to medium
KEYTONES is set to ON
BACKLIGHT is set to ON
Quickdial memory to shared.
It will delete:
Quickdial numbers stored in the personal memory
Last number redial memory.
Personal Emergency numbers.
Unchanged:
Quickdial numbers stored in the shared memory.
You will now need to re-register your handset. Follow the
instructions on page 9.

BT SYNERGY Specifications

General

Talk time	10 hours
Standby time	100 hours
Caller ID	Yes
Answering Machine	No
Intercom	Yes
Handset Speakerphone	Yes
Range	300 meters
Expandability	Up to 4 handsets