10 S5 Battery Validation System
Action How to do it Picture
4
When prompted,
personalize your
installation of the
program.
1 In the Full Name field, type your name.
2 Press the Tab key.
3 In the Organization field, type the name of your
organization.
4 Click on either radio button:
• Anyone who uses this computer
(recommended)
or
• Only for me
5 (Widespread access to the BVM program will
not endanger your battery backup system.)
5
When prompted,
select where to
install the program
files.
The default location is C:\Program
Files\BTECH\BVM 4.0\
Click on Next to continue.
OR
Click on Browse and select other location, then
click on Next.
6
Ready to Install the
Application
Click on Next to continue and install the program.
7 Updating System
The application will install the BVM and BVS
Observer programs to your computer. Click on
Cancel at any time to abort the installation.
8
Finish the
installation
Click on Finish to complete the installation
To Next Page
Loading...
