BTECH S5 BATTERY VALIDATION SYSTEM SCM-600 - Installing the Software; Install the BVM Software

Operating Manual 9
Installing the Software
INSTALLING THE SOFTWARE
1. Install the BVM Software
1. Install the BVM Software ........................................9
2. Activate the BVS Observer ..................................11
3. Installing Drivers for USB Port on SCM-600.......12
Action How to do it Picture
1
Close all other
programs on your
computer.
Choose File>Exit from each program’s menu bar.
OR
Click the red X in the upper right corner of each
program.
2
Insert the BVM
software CD into
your computer’s CD-
ROM drive.
a. Open the CD-ROM drive:
Press the open/close button on the CD-ROM
drive.
OR
i. Double-click on My Computer to open it.
ii. Right-click on the CD-ROM drive.
iii. Select Eject from the popup menu.
b. Insert the CD and close the tray:
i. Insert the CD right side up.
ii. Press the open/close button on the drive.
3
When prompted,
continue installation.
Click on Next to continue.