Operating Manual 31
Starting Up
6
Make sure real-time
operation works
a. In the Communication window, click Enable
Real-time. Four graphs will appear. They are
pictures of the entire battery system during a
single point in time. There are:
• Real-time Graph of Consecutive Unit Voltages
• Real-time Graph of System Voltages
• Real-time Graph of Temperatures
• Real-time Graph of String Currents
b. Observe the real-time graphs to see if they
change over time. If the graphs do not appear or
do not change, call BTECH Tech Support.
c. When finished, click Disable Real-Time to
close the graphs.
Action How to do it Picture
Copy this page as needed
To Next Page
Loading...
