Operating Manual 35
Starting Up
9
Gather system
measurements and
check for
inconsistent
readings, then make
repairs to the battery
system as needed.
This is the longest
process in setting up
your battery system,
and involves fixing
long-standing
problems which may
have been left
unattended until
now.
a. From the Communications window, click
Measurements: Perform. The green Measuring
LED will light up.
b. From the Communications window, click
Retrieve Measurements.
c. Look for any alarm LEDs which have lit up.
d. If alarm LEDs are lit up, from the
Communications window, click Retrieve Alarms.
e. When prompted to clear alarms, click Yes. All
alarm lights will go off.
f. From the menu bar, select Graph > Consecutive Unit Measurements on Same Date...
Action How to do it Picture
To Next Page
Loading...
