48 S5 Battery Validation System
6
Enter the e-mail
addresses which
should receive alarm
messages.
a. From the menu bar, select Locations > Email
Alarm Settings.
b. In the Email Settings window, click on the
Enable check box to select it.
c. In the To: field, enter an e-mail address which
should receive BVM alarms.
d. If desired, click on the check boxes to receive
condensed messages, include the sender name
within the message, and include a subject line
with the e-mail.
e. Click OK when done.
f. To enter another e-mail address, click the next
Email number in the drop down list, then repeat
steps c through e. You can enter up to 10 e-mail
addresses.
Action How to do it Picture
To Next Page
Loading...
