BTECH S5 - Page 11

Installation Manual 11
Getting Ready
1 per
SCM-600
IEC power cord for SCM-600
Provides 120VAC power to the
SCM-600 from a wall outlet or
UPS
varies (1
per VSL
plus
spares)
VSL fuse (glass)
For insertion into VSL inline
fuseholder
varies (1
per LCL
plus
spares)
LCL fuse
For insertion into LCL inline
fuseholder
1 per
SCM-600
RJ11 Patch Cord (6 foot)
For dial-in communications to
SCM-600 (internal modem)
1 per
SCM-600
DB-9 Serial Communications Cable
(6 foot)
Connects PC to front serial port
of SCM-600. Useful for initial
startup / commissioning of
system.
1 per
SCM-600
USB Communications Cable
Connects PC to front USB port
of SCM-600. Useful for initial
startup / commissioning of
system.
varies (1
per SCM-
600, 1 to 4
per VM-
24)
Thermistor (1ambient & battery
thermistor(s))
Senses ambient and pilot
battery temperatures
1 per
SCM-600
S5, 48 Volt Conversion Kit
In place of IEC Power Cord.
Used when powering S5
directly from the batteries
rather than an AC source.
Qty Part Name/Description Picture Purpose