BTECH S5 - Getting Ready; Step 1: Check Shipped Materials; Modules

Installation Manual 9
Getting Ready
GETTING READY
Step 1: Check Shipped Materials
Image sizes not shown to scale.
Modules
Step 1: Check Shipped Materials ..............................9 Step 2: Gather Tools.................................................14
Qty Part Name Picture Purpose
1
SCM-600 (System Control Module)
Gathers data from the battery
validation system; sends the
data to the BVM software
installed on a PC
varies
VM-24 (Voltage Module)
Gathers up to 24 voltage
measurements within your
battery system; multiples are
used to cover all units/cells
qty
strings/
system
CM-2 (Current Module)
Gathers a current measurement
from a single CT (current
transducer); one per string
qty of
CM-2 for
current
option “C”
CT (current transducer) with cable
Measures the current of a
single battery string
qty of
CM-2 for
current
option “S”
Shunt (with wire kit)
Measures the current of a
single battery string