BTECH S5 - Step 3: Run Wires and Attach Connectors to Them; Run Wires from VM-24 to Battery Jars

Installation Manual 31
Installation Procedure
Step 3: Run Wires and Attach Connectors to Them
Run Wires from VM-24 to Battery Jars
Items Needed
Qty Item Picture
1
Battery Wiring List See Appendix
1
Battery Map See Appendix
varies - see
Wiring List
VSL pigtails
varies - see
Wiring List
VSL wires with 1/2 fuse
holders attached (lenghts
vary)
1 per VM-
24
16-pin WAGO plug (shown
with terminating tool)
1 per VM-
24
10-pin WAGO plug
1 per SCM-
600
WAGO connector tool (hook)
for 16-pin and 10-pin WAGO
plug
1
Wire stripper