10
Send Message
Send text message to partners.
Call
When the receiving device receives the CALL command, the radio will
ring, please enter the ID to be searched.
Check
When the receiving device receives the CHECK command, the radio will
feed back the current location, this will allow the ALLOW CHECK to be
effective, enter the ID to be searched.
Nearby People (UV-PRO radios only)
This option sends the CHECK command on the current selected
frequency, and all radios on the same frequency will reply with their
current position option please after receiving the command. This option
requires the receiver ALLOW CHECK to be effective. UV-PRO units only,
non-UV-PRO radios do not have this capability.
Digital Location Send/Receive
Call Sign
Please input your Call Sign.
Path
Choose the path for APRS.
Digital Mode
Enable
Turn On/Off the digital mode.
Share Location
Set the transmission time of the shared location. When the sharing time
is turned off and enable is turned on, it means that only data is received
at this time.
To Next Page
Loading...
