VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 7
Main and Sub Channel Switching
In standby mode, press and hold the Red Return Button to switch
between the main and sub-channels, and the channel with large fonts
displayed on the screen is the currently operating channel (main
channel).
VFO/Memory Channel switching
In standby mode, press and hold the * key to switch between VFO and
memory channels.
Locking the Keypad
In standby mode, long press the # key to lock the keyboard,
long press the # key again to unlock the keyboard.
Setting the VFO frequency
Set the VFO frequency of the radio through the keyboard:
When the radio is in VFO mode, you can input the frequency of the main
channel through the number keys, if you want to input
For 446.00000MHz, just input (4) (4) (6) (0) (0) (0) (0) (0).
Press the
*
key to set the channel steps frequency for the VFO
Press the # key to switch between AM/FM modes.
Adjust the VFO frequency/channel by the up and down arrow buttons:
When the radio is in VFO mode, press the up and down arrows to adjust
the frequency/channel by increasing/decreasing the frequency by the
channel step value. Up arrow increases the frequency, and down arrow
decreases the frequency.
Storing Memories
In VFO mode, enter the frequency you want through the number
To Next Page
Loading...
