VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 11
Digital Channel
The channel currently used for data transmission.
Format
APRS
When using APRS protocol for transmission, the call sign must be
obtained in advance before it can be used. A Amateur (Ham) license is
required.
BSS
Use the manufacturers BSS protocol, suitable for people who have not
obtained an Amateur (Ham) Radio license and call sign. This should be
used only by LMR and Non-Ham users. This can only be used by UV-PRO
radios.
Digital Mute
The radio does not play data transmission sounds over the speaker
when transmitting data.
Using the App to Control the Radio (iOS and Android)
The full capabilities of the radio can be controlled via the App on both
iOS and Android phones.
iOS
The App can be obtained from the App Store Search for “BTECH UV
Programmer” Once installed, verify Bluetooth is enabled on your phone.
Open the app, and you should see the main screen (Figure 1). Clicking
the 3 lines (Hamburger) in the lower left will open the connect window,
and available radios will be shown in the “Bindable Device” option list
(Figure 2). Select your device and it should pair the phone and radio. Once
a radio is connected you will see the operating screen (Figure 3). Your screen
will look different and show the factory default channel listings.
To Next Page
Loading...
