12
Clicking the “gear” will open the main settings window (Figure 4).
The options will be covered starting on page 30. Next is connection
management (Figure 5). Use this to scan for Bluetooth devices to
connect to. Next there is “General Settings” (Figure 6), The next option
is “channels and groups” (Figure 7). Here changes are made to the
memory channels and memory banks. Next is Band Scan (Figure 8)
this allows you to scan through a range of frequencies to nd activity. In
the next option window (Figure 9) you can set the different functions of
the programmable buttons.
Figure 1 Figure 2 Figure 3
To Next Page
Loading...
