VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 9
Once the valid frequency is received it will stop scanning and display the
received tone frequency.
Write this down to add when programming- it does not automatically
store this tone frequency or code.
FM Radio
Open the FM radio menu and press the up and down buttons to
automatically search for FM radio frequencies. You can also enter your
radio frequency directly using the keypad.
Sending Memory Content to Other Units
To share the channel list with other units, turn on the radios to be
programmed one by one, switch the menu on the new or unprogrammed
radio to “receive channels”. Both radios must be on the same channel.
Open the programmed radio menu and select “send channel “, when
each radio to be programmed is displayed as completed, the frequency
of the current list will be copied to the other radios and available.
Signaling Settings
ID
Please input your call sign or your ID.
Allow Check
Allow your partner to send instructions to check your current location,
and your location will be feedback to the partner’s device.
Signaling Preamble
When sending signaling, add a preset code to make the end tone
sound more rounded.
To Next Page
Loading...
