VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 21
and down keys to switch between the main band and sub band, and
press the side key to switch to the active channel.
Scan
If active, the radio will be in a scanning state, and all channels that
are set to be scanned will be.
Talk Around
On a channel with an offset frequency, if the option is activated, The
TX becomes the same as the RX frequency.
Power
Change the output power (H-M-L).
Channel Group
Change the Channel Group in use.
Squelch Level
Adjust the squelch level of the received signal, level 0-9, the smaller
the number, the easier it is to receive weak signals.
TX Time Limit
Limit the maximum time of each transmission.
PTT Follow
When this option is on, and the sub band receives a signal, press
the PTT to reply within 10 seconds, you can transmit on the sub
band frequency without switching to the main band.
Tail Elimination
Turn on this option, no end tone will be heard between radios of
the same brand.
PTT Release
This places an audio transmission when you release the PTT button.
To Next Page
Loading...
