VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 23
APRS settings
Call Sign
Please input your Call Sign.
Path
Choose the path for APRS:
WIDE1-1,WIDE2-2
WIDE2-1
WIDE 2-2
ARISS, SGATE, WIDE2-1 (For use with the International Space Station ISS)
CUSTOMIZE
Digital Mode
Enable
Turn On/Off the digital mode.
Share Location
Set the transmission interval of the shared location. When the
sharing time is turned off and enable is turned on, it means that
only data is received at this time- TX of your location will not be
sent.
Digital Channel
The channel currently used for data transmission. Choose from
programmed channels or use the current channel which can be
changed via the channel selection function.
Format
APRS
When using APRS protocol for transmission, the call sign must be
obtained in advance before it can be used.
*HAM RADIO USE ONLY- License required
To Next Page
Loading...
