BTECH UV-PRO - Page 29

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 29
Prev Channel Group In standby mode, press the
button programmed as “Prev
Channel Group” to quickly switch
to previous Channel Group
Next Channel Group In standby mode, press the
button programmed as “Next
Channel Group” to quickly switch
to Next Channel Group
T-CALL Transmit 1750Hz Tone
Main-PTT Press the key programmed as
“Main PTT” in standby mode to
quickly transmit on the main channel.
Sub-PTT Press the key programmed as
“Sub PTT” in standby mode
to quickly transmit on the Sub
channel.
Send Location Manually send APRS location
once
Toggle Dual CH Switch between single watch and
double watch status
Dual CH Main Channel Switch Switch Main Band between A/B
Band
Toggle Monitor In standby mode, press the
button programmed as “Radio
Switch” to quickly Turn on/off the
squelch