VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 31
Radio Settings Dual Watch Activate both the Main
and Sub channels
Scan Turn on the channel
scanner- Channels
MUST have “Allow
Scan” checked
Talk Around Set the TX and RX to
the same frequency
Power Set Low/Medium/High
TX power
TX Subtone Set the TX Subtone
(CTCSS or DCS)
RX Subtone Set the RX Subtone
(CTCSS or DCS)
Offset Set the TX frequency
by this amount from the
RX frequency
Channel Group Switch between
programmed channel
groups
Squelch Level Set Squelch level (0 for
Open Squelch, 9 for
Tight squelch)
TX Time Limit Set Maximum
continuous TX time.
Select from Off to 300
seconds
To Next Page
Loading...
