Sfera Proximity Reader
Installer manual
13
3.2.2 Deleting passepartout badges
2 The device emits a long confirmation beep.
1 Place a manager master badge close to the reader;
The device emits a beep, and the green LED starts
flashing.
Repeat the operation three times in succession.
- The procedure will delete all the saved passpartout and apartment master
badges.
- To only delete a specific badge use the TiSferaDesign software.
Three times
Manager master
3
The red LED flashes and then switches off to confirm
that the deletion has been performed.
To Next Page
Loading...
Need help?
General
