Buchi B-540 - Printing of Results

20
Melting point B-540
5.6.5 Printing of results
1. Automatic printout after every determination
When a determination is complete, results and selected
parameters can be printed out automatically. If this automatic
printout is required, it is necessary to accesss configuration
menu 3.
The menu key is pressed for 3 seconds access the
first submenu.
Press the menu key tweice to access the 2nd
configuration menu.
The connected printer is selected in the PRINTER box.
In the AUTOPRINT bix it is stipulated that for:
YES: there will be an automatic printout after
every determination.
NO: there will not be a printout after every
determination.
2. Manual printout after every determination.
The user can stipulate for which determination he wishes to
have a printout.
No must then be selected for AUTOPRINT in configuration
menu 3.
If a printout is required after completion of a determination,
the PRINT box is accessed with the MENU key and confirmed
with ENTER.
..
5 Operation
AUTOPRINT : XXX
PRINTER : XXXXX
KEYBOARD : XX
TEMPERATURE : 25.0 °C
RECALL CLEAR
STORE PRINT
AUTOPRINT : XXX
PRINTER : XXXXX
KEYBOARD : XX