Buchi B-540 - Page 45

43
Melting point B-540 9 Appendix
9.4.1 Main menus 1-3
Actual temperature
Setting range: 25 - 400°C
Parameter: 0.1 / 0.2 / 0.5 / 1.0 / 2.0 / 5.0 / 10.0 / 20.0
Automatic; SETPOINT + 15°C or variable to 410°C
Actual temperature
Program name (max. 15 digits)
Sample identification number (max. 15 digits)
Actual temperature
RECALL/CLEAR: Recalling/deleting the stored program
STORE: Store the program
PRINT: Print the measure results on a connected printer
9.4.2 Heating-/Cooling phase
Quick heating (approx. 70°C/min.) to SETPOINT.
SP = SETPOINT
SETPOINT reached. Continue with the START-key.
GR = GRADIENT
MP = MAXPOINT
Slow heating with selected Gradient to MAXPOINT;
or early stopping with the STOP-key (manual)/auto detection.
GR = GRADIENT
MP = MAXPOINT
Quick cooling down to SETPOINT.
Quick cooling to ambient temperature.
9.4.3 Program memory
RCL = Recall = Recalling the programs stored
CLR = Clear = Clearing the programs stored
Ä
TEMPERATURE : 25.0°C
SETPOINT : 100°C
GRADIENT : 2.0°C
MAXPOINT : 120°C
TEMPERATURE : 25.0°C
NAME :
ID# :
TEMPERATURE : 25.0 °C
RECALL CLEAR
STORE PRINT
PRESS START
TEMPERATURE 25.0 °C
SP 136 °C
TEMPERATURE : 135.6 °C
GR 2.0 °C
MP 145 °C
TEMPERATURE : 145 °C
TEMPERATURE : 100 °C
TEMPERATURE : 25.0 °C
RCL: XXXXXX q
XXXXXX
XXXXXX Q
TEMPERATURE : 25.0 °C
CLR: XXXXXX q
XXXXXX
XXXXXX Q
TEMPERATURE : 135.6 °C
GR 2.0 °C
MP 145 °C