8000302 | Instructions for use RUCK Podiatry Couch MOON | REV 04 |
Revision status 08/09/2023
34
Operation and use
Press memory buttons 1 and 2 at the same
time and hold the buttons down until you hear
2 beeps. All LEDs light up: The button lock is
now active.
Deactivate the button lock by pressing and
holding both buttons again until you hear
2 beeps. The button lock is now deactivated
again.
5.1.2 Additionalfunctionsofmemorybuttons1and2:Buttonlock
After maintenance tasks or replacement of
components, the drives need to be reinitialised.
Press memory buttons 1 and 4 at the same time
and hold the buttons down. The couch will be
initialised. Several short beeps sound during
initialisation. Release the buttons again when
no sound is heard for at least 3seconds.
Move all drives into their respective maximum
and minimum positions using the buttons 5, 6
and 7.
After this, the podiatry couch is again ready for
operation.
5.1.3 Additional functions of memory buttons 1 and 4: Initialisation
To Next Page
Loading...
